NIMMSTA MOTION
The Motion Loop holds the Smart Watch securely on the hand. With the Motion Trigger, a natural movement within the process triggers the scan. Here you will find settings, conversion, videos and all documents on Motion.
MOTION LOOP AND MOTION TRIGGER
Motion Trigger and Motion Loop are the next generation of NIMMSTA. No conventional button, no mechanical contact point.
Wear
The knitted band holds the Smart Watch securely on the hand, even through movement-intensive work.
Trigger
A natural movement within the process triggers the scan. We tune the sensitivity to your process.
For your process
01 · MOTION SETTINGS
The trigger sensitivity is tuned to the process, not fixed in the hardware. The same motion behaves differently depending on the work in front of it.
Deliberate
A deliberate, less sensitive trigger. The scan fires at the storage location, not while the worker walks the aisle.
Rapid
A rapid-fire trigger. Scan after scan, as fast as the parcels arrive.
Your process sets the pace, not the hardware. The setting is configured by NIMMSTA Service, so there is nothing to calibrate on the floor and no workstation rebuild when a process changes.
MOTION SCAN IN USE
Three short clips from everyday warehouse work.
The scan with one tap.
The scan with two taps.
Scan after scan, as fast as the parcels arrive.
02 · CONVERTING YOUR SMART WATCH
The kit contains the Motion Loop, the inlay for the charging station and the tool you need. Convert one watch first, run it in your process, then roll it out across the fleet.
Step 1
Fit the Motion Loop mount to the Smart Watch with the enclosed screws and hex key.
Step 2
Slide the Smart Watch into the Motion Loop and put it on. Adjust it to personal fit and comfort. If the band is longer than the hand needs, cut it to size within the grey area marked on the band.
Step 3
Peel the backing off the inlay and press it into the charging station cradle, so the converted watch still seats correctly on charge.
The conversion is reversible at any time. The same three steps as on the printed card in the box: download as PDF
03 · PUTTING ON AND ADJUSTING THE MOTION LOOP
Everyone works differently, so set the Motion Loop to what feels right for the person wearing it. It should sit firmly enough that the Smart Watch stays put through the shift, without constricting the hand. If the band is longer than needed, cut it to size, only within the grey area marked on the band.
Fit the mount, attach the Motion Loop, insert the inlay.
Put it on, adjust fit and comfort, shorten if needed.
MOTION LOOP
A seamlessly knitted band with a thumb opening. Size-adjustable, one part fits both the right and the left hand: no sizing to stock, no left and right variants to keep apart.
Source: Motion Loop data sheet 520810, as of 12 Oct 2026.
We did not want to simply develop another button. Our goal was to make the entire process more intuitive and more reliable.
Andreas Funkenhauser04 · DOWNLOADS
All the benefits and information on Motion, summarised compactly. Useful if you need to brief a colleague or take Motion into an internal discussion.
The printed card from the box: convert the Smart Watch in three steps.
NIMMSTA Service. The trigger is tuned to your process, for example deliberate for picking and rapid for sorting. Nothing needs to be calibrated on site.
Yes, the conversion is reversible at any time. We recommend converting one watch first, testing it in your process and then rolling it out across the fleet.
Yes. It is size-adjustable and fits either hand by turning it inside out, with or without work gloves.
It has no electronics and can be swapped in seconds. Wash it at 30 °C, do not bleach, tumble dry or iron.
Yes, the subscription includes 4 Motion Loops per licence and year. More on the page Collaboration and packages.
Talk to your personal NIMMSTA contact. Together we will look at which Motion setting suits your process.